Looking for a Makita LS1018 Review?
- Powerful 13.0 AMP direct drive motor requires less maintenance and delivers 4,300 RPM
- Miters 0° - 47° left and 0° - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right)
- Cuts up to 12” at 90° and 8-1/2” at 45°
- Linear ball bearing system engineered to deliver "dead-on" accurate cuts
- Rear handle bevel lock is easily accessible and adjusts 0° - 45° (left and right) with positive stops at 0°, 45° (left and right)
In the category of cross-cut saw tools, Makita LS1018 is one of the finest in the market. Not just is it great with its varied features, it is also quite affordable. This article will detail its specifications, features, pros, and cons of the product.
Overview
The product is going to impress the user just from the unpacking time itself. It comes well-greased that gives it an impressive look. Apart from this, it is also overloaded with various features to make it worth the cost. The Makita LS1018 Review will summarize some features and specifications that make this product one of the best in this category.
Pros
These are some of the paybacks that you get in this product.
- You have push as well as pull function in the saw so that you can work conveniently.
- The miter saw cuts any material very precisely and smoothly.
- The product is perfect for cutting as well as remodeling activities.
- The diameter of the saw blade is huge for heavy cutting activities.
The pate of the saw can tilt to different angles to offer you angular cuts in a precise way. - The tool weighs light so that the user can carry it easily and work with it comfortably.
Cons
Some of the rip-offs of the product are here.
- No laser light is available in many other tools.
- The dust collector bag is relatively small in size and can collect the dust of only one-time working.
- The customer may have to buy a metal-cutting blade separately as the edge provided is just to cut wood.
Specifications
The necessary specifications are the product are:
- A blade of 10 inches
- A Direct-drive motor of 13 AMP
- The product weighs 43 pounds
- The speed of the edge of 4300 rpm
- The bevel ranges are 0 degrees to 45 degrees left and right
- The miter ranges of till 47 degrees at the left and till 60 degrees at the right
Features
Some of the crucial features that make the Makita LS1018 Review attractive are here.
- The tool is relatively light in weight for easy handling and transport.
- The product starts softly so that the user can have proper control over it.
- The D-shaped handle is ergonomic rubber for a better grip.
- The aluminum base offers cutting more precisely.
- The product features an electric brake to enhance productivity.
- The trigger switch is oversized for smoother operation.
- There is a guard-system on the blade that is see-through so that the users can check out the lines through which the tool is cutting the material.
- A dust collector is there to keep the area of work clean.
Usability
The product is highly usable for many things due to its cross-cutting features.
- You can do activities such as crown molding and baseboard cutting quite smoothly.
- You also conveniently can cut-through a lumbar of 4×4 dimensions in a single shot.
- The product is perfect for various tasks such as carpentry, fine woodworking, or even for construction activities.
The light-weight product is compact yet comes with many elements such as triangle rule, vise, wrench, extension wings, and a big blade. All these elements make the tool efficient enough in cutting through various materials with precision. For those accurate cuts that you get, you need to thank the linear ball-bearing system in the machine.
Though the tool comes along with a warranty, make sure that you are not misusing it. Read through the guide book’s guideline to use it in the right way to get the best results.
Power
The product is furnished with a powerful motor of 13 AMP to offer you a powerful and precise cut each time. The speed of 4300 rpm provides you a faster cutting of whatever material you are cutting. The tool has the power of cutting plywood and even lumbar. With a different blade, the product can also cut aluminum.
Safety
The tool comes with a lot of safety features as per the Makita LS1018 Review.
- There is a feature of engine brake in the product that you can activate with a switch. As you do so, the saw stops temporarily immediately.
- One of the most critical safety features of the tool is that of a soft start. The device starts softly so that you can have proper control over it.
- Though there is no laser option, the blade is guarded with a see-through cover so that you can check the cuts closely without hurting yourself.
- The handle is ergonomic rubber for a proper grip even when the tool is in full force.
FAQs
Q1. How big is the dust collector of the Makita LS1018?
Answer: This tool’s dust collector is not big enough for a decent one for one-time cutting. But the device has kept the option open for you to replace it with a bigger one.
Q2. Can I add a laser light on it?
Answer: Yes, the laser light can be added to the product though it does not come with one from the manufacturer.
Verdict
- Powerful 13.0 AMP direct drive motor requires less maintenance and delivers 4,300 RPM
- Miters 0° - 47° left and 0° - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right)
- Cuts up to 12” at 90° and 8-1/2” at 45°
- Linear ball bearing system engineered to deliver "dead-on" accurate cuts
- Rear handle bevel lock is easily accessible and adjusts 0° - 45° (left and right) with positive stops at 0°, 45° (left and right)
Covering the features, pros, and cons in the Makita LS1018 Review can be an efficient tool at an affordable cost. The product has features for efficient cutting and the safety and comfort of the users. Hence, it is reliable, efficient, and at the same time, also safe and comfortable.
- Universal teeth for general use, cuts along and across the grain
- Precision cross ground teeth
- Teeth can be resharpened
- Skew back for balance & reduced friction
- Cuts timber chipboard, plywood & other wood based materials
- Made in Sheffield England, comes complete with two wooden handles. Handle rivets do not need to be peened they are friction fit so you can take your handles on and off easily
- 5 foot saw with Great American style teeth which means each tooth cuts the wood and clears the shavings. The gullets are added to enable the waste wood to be cleared whilst cutting. Comes sharp from the factory. The sharpened bevel on this design are much flatter than other designs. The flatter angles from the factory are the most versatile as you can take metal away for a steeper angle should you prefer but this is a personal preference not necessarily functional in every wood
- More heavy duty than most modern saws on the market. Made from British CS80 steel with a Rockwell hardness of 44-46
- Blade thickness of 1.5mm to provide the superior stiffness required when cutting on long strokes. Can be Re-sharpened using a Large File
- These saws are made to last a lifetime with proper care. Simply oil and clean after every use. They are easily sharpened with a large file. Please see our selection of files for sharpening.
- Amazon Kindle Edition
- Taylor, W. S. (Author)
- English (Publication Language)
- 15 Pages - 11/25/2021 (Publication Date) - Left Of Brain Onboarding Pty Ltd (Publisher)
- Made in Sheffield England, comes complete with two wooden handles. Handle rivets do not need to be peened they are friction fit so you can take your handles on and off easily
- 6 foot saw with Great American style teeth which means each tooth cuts the wood and clears the shavings. The gullets are added to enable the waste wood to be cleared whilst cutting. Comes sharp from the factory. The sharpened bevel on this design are much flatter than other designs. The flatter angles from the factory are the most versatile as you can take metal away for a steeper angle should you prefer but this is a personal preference not necessarily functional in every wood
- More heavy duty than most modern saws on the market. Made from British CS80 steel with a Rockwell hardness of 44-46
- Blade thickness of 1.5mm to provide the superior stiffness required when cutting on long strokes.
- These saws are made to last a lifetime with proper care. Simply oil and clean after every use. They are easily sharpened with a large triangle file. Please see our selection of files for sharpening.
Hi, I’m Sal Muller of Tooltrip.com. My DIY experience led me to understand essential power tools for home projects. Tooltrip.com guides enthusiasts and professionals in choosing right tools for any job. I provide concise top tool reviews for easier, efficient DIY.
