Looking for the Best Circular Saw Guide Rail?
In A Rush? Check Out The Number 1 Pick Here:
- Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels
- Simply align the guide Track with your marks to make accurate cuts
- Hold track in place without clamps thanks to anti-slip guide strips
- Prevent splintering with anti-chip strips that support material during the cut
- Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,
Whether you are a professional or a hobbyist, a circular saw is one must-have in your toolbox. But there is something else that one must own to enhance their circular saw’s functionality, that is guide rail. Well, there are a lot of guide rails available in the market. And thus, here we are to let you select the best circular saw guide rail of all.
Best circular saw for beginners
Table of Contents
Features of Best Circular Saw Guide Rail
- Length: How long cutting length did a circular provide? Although the average cutting length of a guide rail is 24 inches, you can find a guide rail with a cutting height of up to 100 inches.
- Weight: Weight is a crucial feature to determine a guide rail’s portability and thus to consider.
- Material: Plastic guide rails as not as durable as metal ones. Must look at the material before purchasing a guide rail.
Best 5 Circular Saw Guide Rail: Our Picks
1. Circular Saw Track | Best Overall
- Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels
- Simply align the guide Track with your marks to make accurate cuts
- Hold track in place without clamps thanks to anti-slip guide strips
- Prevent splintering with anti-chip strips that support material during the cut
- Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,
Circular Saw Track is the ultimate solution if you want to make cross cuts, cut rips, or angle cuts. Irrespective of the material you are working on, like plywood, panel or MDF, or any other material, it will help the sharp blade make precise cuts.
You can cut up to 48-inch-long material with the help of this circular saw. Additionally, it is an easy-to-use saw guide rail with an anti-slip guide, ensuring its user’s safety.
2. Kreg KMA2685 Rip-cut Circular Saw | Small Guide Rail
- Make rip cuts and crosscuts up to 24" Wide
- Cut multiple pieces to the same size With just one setup
- Use the oversize edge guide for precise control throughout the cut
- Eliminate need for marking, measuring, and layout lines
- Take your saw to the material instead of having to take your material to the saw
Next on our list is Kreg KMA2685, known to make precise and repetitive fine cuts. With a cut size of 24 inches, it is ideal for all types of materials.
Additionally, it comes with a measuring scale, which will make it handier to mark and cut everything. Although it is not a worm drive saw, it still includes right and left blade models.
3. Kreg KMA3700 ACCU-Cut XL | Large Guide Rail
- Break down panels and plywood easily and quickly with cutting capacity up to 100"
- Splinter-free cuts with tear-out protection from anti-chip guide strips
- Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location
- Easily attaches to your left-blade or right-blade circular saw, and removes easily
- No clamps needed thanks to Anti-slip guide strips that keep the track in place through the entire cut
If you are looking for a circular saw guide to cut a large piece of material, up to 100 inches, then Kreg KMA3700 is one choice you can consider.
Containing anti-slip chirp, it ensures the complete safety of its user while working with a circular saw.
It’s a lightweight and portable rail you can bring with you to the site without much hassle.
4. Bora WTX Clamp Edge and Straight cut Guide for Circular Saw | Adjustable Guide Rail
- GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill.
- CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools.
- LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge.
- AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts.
Next on our list is Bora WTX , which is compatible with almost all the saws available in the market. With a maximum cutting length of 50 inches, it is made of heavy aluminum and is a sturdy and durable rail.
Additionally, you can pair it up with its second unit; then, it can provide a measurement of up to 100 inches. With adjustable non-slippery film, it becomes pretty easy to use this guide.
5. Woodriver Guide Rail Kit | Versatile Rail
- Two 56" Guide Rail components feature heavy-duty aluminum extrusions
- Guide rail component has a 2-1/8" x 1/2" profile with integral 1/4" T-tracks
- Guide rail connector locks together multiple guide rails to form a continuous guide
- Clamps swivel about the “T” shaped anchor at any angle - Guide rail clamps secure the guide rail at each end
- WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans.
Last but not least is the Woodriver. Made with heavy-duty aluminum, it can withstand the rough usage of the workshop as well.
To provide you a better grip while holding it, it has a T-shaped handle, providing flexibility. As the clamp is available at both ends, you can cut up to 56 inches using this guide.
FAQs
How can I get precise cuts with the help of a guide rail?
One should keep in mind a few things while cutting material using guide rail, like properly adjusting the fence, keeping it clean, and aligning material properly.
Is circular saw RIP guide necessary?
Although professions don’t need one, for beginners, one must work as per the RIP guide.
Verdict
Circular saws are no doubt very helpful when you want flexibility in work. But for precision, you will need a guide rail as well. Although all the circular saw guide rails, I mentioned above have some unique features. But, Circular Saw Track, because of its multifunctionality and preciseness, is the best overall.
- Includes two 50-inch track saw tracks and a set of adapters
- Make straight and precise cuts over 8 feet long
- Included adapter set features four set screws for maximum stability
- Designed to fit the WEN CT1065 Plunge Track Saw
- Universal design compatible with Evolution, Makita and Festool track saws
- Kit includes: (2) 55” guide rails and (2) track saw guide rail connectors
- Function: This exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one (Festool) guide rail to another (Festool) guide rail
- Premium quality: Made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects
- Compatibility: The 55” GUIDE rails work seamlessly with the Makita plunge saw and Festool track saws
- Plus you can easily customize length using the POWERTEC Saw Guide Rail Connector kit, or the Makita connector or the Festool Connector for longer cuts. Additionally, this handy track saw tool can be used with the Makita guide rail adapters and festoon guide rail adaptors and other rail guide devices to extend its compatibility to a wider range of machines, such as routers
- One tool, countless uses: the Bora QuickCut does the work of multiple tools, All with one useful saw guide. The multiple angles on this circular saw accessory eliminate the need for a miter saw or more complex jigs. Cut wood or soft metals with unrivaled precision at four preset angles: 22.5°, 45°, 60°, and 90°.
- Mark, measure, and cut with ease: save yourself the calculations of a typical tri-square with bora’s advanced cut guide. Measure perfectly flush angles for framing and crown molding, without doing the math. The ruler also features imperial and metric measurements.
- Easy grip: The large, curved handle provides extra comfort and precision. With the QuickCut, you can get a firm hold on your circular saw without your edge guide slipping.
- Durable: Bora’s QuickCut saw guide is made with strong aluminum extrusion and conveniently placed ruler marks. It's 16 inches long, with a 14-inch (35.5cm) guide rail for making long, straight cuts.
- Bora Quality: Bora tool is a leader in innovative power tool accessories that make your jobs and projects run smoothly.
- The rip guide can be used with Bora WTX saw plate to make precise, straight cuts up to 24”
- Extruded aluminum rail attaches securely for confident cuts
- Comfortable, adjustable rip handle ensures solid grip
- Easily fits into your toolbox so you can take it anywhere
- Lifetime warranty
- Product 1: Powerful 12.0 AMP motor for optimum performance in a wide variety of materials
- Product 1: Precision accurate cutting delivers a splinter-free mirror finish
- Product 1: Electronic speed control maintains constant speed under load for smooth cutting
- Product 1: Variable speed control dial (2,000-5,200 RPM) enables user to match the speed to the application
- Product 2: Kit includes: (2) 55” guide rails and (2) track saw guide rail connectors
